Precision Ground Stainless Steel Flat Bar

  • O1 Precision Ground Flat Stock Standard - Buy O1 Steel

    O1 Precision Ground Flat Stock Standard products are precision ground to +/- .001″ thickness and +.005″ / -.000″ width, held square within .003″ / Inch. Our Precision Ground Flat Stock products are precision ground with a Mattison Ground Finish of 32 RMS or better.

  • Precision Ground Flat Stock - pmsteel

    All Precision Marshall Ground Flat Stock is 100% free of decarburization. Thickness and width are horizontally ground to a maximum finish of 40 Ra. All tool steel and stainless analyses (O-1, A-2, D-2, S-7 and H13) are supplied in the annealed condition. Close control assures complete spheroidization throughout.

  • Ground Flat Stock Archives - Precision Brand Products, Inc.

    Distributor Locator; Our Products; About Us; Videos; Custom Shims; FAQ. ABC Blackener? Feeler Gage Questions; General Questions; Hot Melt Coating; Punch & Die/TruPunch? Set Questions

  • Turned, Ground and Polished (TGP) - Northlake Steel

    Provide turned, ground and polished shafting services for a range of tolerance sizes from 1/2'' to 13'' diameter shafts that are up to lengths of 70 feet. Steel Bar Products. "Precision shafting ground to a tolerance finer than a human hair"?

  • precision ground stainless steel | eBay

    Find great deals on eBay for precision ground stainless steel. Shop with confidence. Skip to main content. eBay Logo: 440c Stainless Steel Bar .160" x 1" x 9" PRECISION GROUND folding KNIFE 10-2. Brand New. $9.99. Hardened And Ground Stainless Steel 8 Inch Precision Vernier Caliper Graduation See more like this.

  • Precision Ground Flat Stock - Knife Steel - Blade Steel

    Tool Steel Service of California, Inc. sells high quality Precision Ground Flat Stock (PGFS) in a variety of grades and sizes. We sell the following grades online A2, D2, O1, S7, 4140, 410 Stainless, 420 Stainless, 440C Stainless, and A38/1018 Low Carbon.

  • Precision Ground Machine Ready Blanks Manufacturer

    Precision Ground Machine Ready Blanks Manufacturer. Dix Metals is a premier provider of precision-ground, machine-ready metal blanks, including 6061 aluminum, stainless steel, and A36 carbon steel and other materials used extensively in manufacturing and machining processes. Our standard aluminum and stainless steel machine ready blanks are available for purchase.

  • MetalsDepot? - D2 Flat Ground Tool Steel

    D2 Flat Ground, is an air-hardening, high carbon , high chromium tool steel with extremely high wear resisting properties. It is a very deep hardening steel and will be practically free from size change after proper treatment. The high percentage of chromium gives it mild corrosion resisting properties in the harden condition.

  • Stainless and Engineering Steel Bar and Wire - Atlas Steels

    - Stainless Steel Bar Flat - Stainless Steel Bar Channel - Stainless Steel Bar Square products and the Atlas range please select the relevant product group of your interest from the dropdown shown in the "Stainless and Engineering Steel Bar and Wire" menu bar. Precision ground:

  • Bar Stock | McMaster-Carr

    Choose from our selection of bar stock, including general purpose low-carbon steel, alloy steel, and more. In stock and ready to ship.

  • Tool Steel Online - A2, D2, M2, Cut to Size, Precision

    Tool steel and online metal distributor homepage. Key Metals - Chicago, IL. Supplier of tool steel, precision ground flat stock, drill rod, carbon, alloy, aluminum

  • Round Bars | North American Stainless

    ROUND BARS Not all combinations of dimensions, tempers and finishes are available. Contact NAS for specific requirements. Dimensional Tolerance: Per ASTM A484. Tighter tolerances on precision-ground bars, as well as ISO tolerances, are available.

  • MetalsDepot? - T303 Stainless Steel TGP Shafting

    303 Stainless TGP Shafting, is stainless round that has been Turned, Grounded, and Polished up to a tight diameter tolerance of +/- .0025" making it ideal for all bearing applications where greater strength and good corrosion resistance is required. 304 Stainless TGP, bearing shaft quality is widely used for all shafting applications that are exposed to the elements - food, chemical, acidic

  • Stainless Steel Blanks, Flats, Bars, Plates, and Sheet

    Opt for stainless steel stock including stainless steel blanks, flats, bars, plates and sheet stock from Grainger to help improve your firm’s productivity. Shop a precision stainless steel blank assortment in squares and rectangles that have guaranteed tolerances and are machine ready, so they increase throughput by reducing your prep and

  • Speedy Metals - Turned, Ground & Polished 1045 Steel Round

    Buy Turned, Ground & Polished 1045 Steel Round from Speedy Metals, America's favorite online metal store with unsurpassed service, highest quality and best selection. Angle Channel Flat Ground Flat Hexagon Plate Rectangular Tube Round Round Pipe Round Tube Sheet Square Square Tube Threaded Rod Ground and Polished Precision Shafting is

  • Alexandria Precision 17-4 PH Precision Ground (Standard)

    Alexandria precision is a leading services of 17-4 PH Precision Ground (Standard).ASTM A564.

  • Precision Ground Metric Stainless Steel Plate

    Flat Ground Stock: Metric Sized On Southern Tool Steel, LLC. Results 1 - 25 of 39 Browse Flat Ground Stock: Metric Sized in the Southern Tool Steel, LLC catalog including Item #, Grade, Condition, Plate Hexagon Bars Stainless Steel FGS-410MPFG, 410, N/A, Metric, Precision Flat Ground, QUOTE.

  • Precision Ground Stock | Metal Supermarkets UK - Stainless

    Precision Ground Stock is a precision ground flat bar that comes in 36″ lengths. It is most commonly made from tool steel and used where accuracy and tight tolerances are a must. Because it is precision ground, it has very tight tolerances and accuracy, and is commonly used for tools and dies.

  • Amazon: O1 Tool Steel Sheet, Precision Ground

    The O1 tool steel sheet has been precision ground and polished, meets American Society for Testing and Materials International ASTM A681 specifications, and has a standard tolerance. The O1 tool steel grade has better machinability than A2 tool steel.

  • Stainless Steel - General Information - EN Standards for

    Stainless Steel - General Information - EN Standards for Stainless Steel Bar. EN Standards for Stainless Steel Bar. EN10058 Tolerances for Hot Rolled Flat Bars ( The K tolerance is usually only applied to larger diameter bars - over 75mm H8 = Precision Ground.

  • Penn Stainless Bar Products - Stainless Steel Round Bar

    Stainless Steel Round Bar. Penn Stainless stocks a full range of stainless round bar from 1/16″ round thru 26″ in diameter. Nearly all grades of stainless steel are stocked in round bar, including 302, 303, 304/L, 304H, 309/S, 310/S, 316/L, 317/L, 321, 321/H, 347, 347H, 410, 416, 420, 440C, 17-4PH, Duplex 2205 and Alloy 20.Heat treated stainless round bars are stocked in 17-4PH, conditions