Incoloy 926 (N08926) nickel alloy is a high corrosion resistant super austenitic stainless steel containing high Cr and high Mo. It maintains good corrosion resistance in harsh environments such as high temperature, sea water or flue gas desulfurization equipment.
Chemical compositions of AISI (ASTM/ASME) and UNS austenitic stainless steel grades Introduction - AISI ASTM ASME and UNS. Most ASTM and ASME standards list the steel grades by their UNS (Unified Numbering system) numbers but also make reference, where appropriate to the more general AISI (American Iron and Steel Institute) grade designations.
The economic cost and wider service area, N08926 N08367 2 in 1 stainless steel is done. Recently, Sweden's 6 molybdenum super stainless steel arrived. Due to the high similarity and cross-cutting of N08926 and N08367 metals, the material covering the above intersections has been satisfied by both users, and has obtained good market opportunity.
Alloy 254SMO / 6Mo / F44 is a fully austenitic alloy containing 6% molybdenum and offering excellent corrosion resistance in a wide variety of aggressive, aqueous environments. It replaces the conventional, austenitic stainless steels (AISI 316 and 317), where their capabilities are pushed to their performance limits.
However, super austenitic stainless steels can exhibit susceptibility to chloride ion stress corrosion cracking in hot chloride solutions. However, these steels offer resistance to crevice corrosion in sea water at elevated temperatures. Alloy 27-7Mo (UNS No. S31277) offers corrosion resistance superior to that of the 6%Mo super austenitic steels (UNS N08926, S31254) and in some instances has corrosion
A stable austenite structured steel contains about 18% Cr, 8% ~ 10% Ni and about 0.1% C. Chrome-nickel austenitic stainless steel including the most familiar stainless steel 18Cr-8Ni (TP304) and the series of high Cr-Ni steel developed by increase Cr, Ni contents and add Mo, Cu, Si, Nb, Ti and other elements.
With its high level of chromium, Super-Duplex steel provides outstanding resistance to acids, acid chlorides, caustic solutions and other environments in the chemical/petrochemical, pulp and paper industries, often replacing 300 series stainless steel, high nickel super- austenitic steels and nickel-based alloys.
Austenitic chromium-nickel-molybdenium stainless steel with excellent resistance to stress corrosion cracking, pitting and crevice corrosion. Resistant to iintergranular corrosion in the temperature range up to 400°C. For optimum resistance, surfaces should be pickled, scalefree heat treated o machined. Applications:
Super Duplex Stainless Steels Super Duplex 2507 stainless steel (UNS S32750) contains 25% chromium, 4% molybdenum and 7% nickel. This alloy was first used in the 1980s when it was uniquely designed for extreme and demanding applications which necessitate extraordinary corrosion and strength resistance, such as in chemical processing
Alloy 926 is a super-austenitic molybdenum stainless steel that exhibits excellent resistance to a variety of highly corrosive environments. The combination of molybdenum and nitrogen in its composition resists pitting and crevice corrosion, while copper improves sulfuric acid resistance, and nitrogen improves yield and tensile strengths.
NAS 185N (UNS S31254) - Super Austenitic Stainless Steel. Depending on the environment, this stainless steel offers high economy combined with corrosion resistance comparable to that of Nickel alloy and pure titanium. Nippon Yakin supplies this product in plate, sheet and strip form.
Incoloy926 / N08926 / DIN 1.4529 Incoloy 926 is an austenitic stainless steel alloy has a similar chemical composition with 904L alloy, its nitrogen content is 0.2%, molybdenum content is 6.5%.Molybdenum and nitrogen content significantly increased the resistance of pitting and crevice corrosion in the halide media.
Stainless Steel Pipe, Super Austenite, 254 Smo manufacturer / supplier in China, offering High Quality N08926/25-6mo/1.4529 Super Austenitic Stainless Steel Pipe, 2205/S31803/1.4462/ Stainless Steel Pipe, Inconel 625/Alloy 625/N06625/2.4856 Stainless Steel Plate and so on.
Alloy 25-6MO (UNS N08926/W. Nr. 1.4529, formerly UNS N08925) is a super-austenitic stainless steel containing 6% molybdenum and enhanced by an addition of nitrogen. The nickel and chromium contents of this alloy make it resistant to a wide range of corrosive environments.
6% Molybdenum Superaustenitic Stainless Steel with Outstanding Resistance to Chloride Pitting, Crevice Corrosion and Stress-Corrosion Cracking. Alloy SSC-6MO (UNS N08367) is comparable to and competes directly with AL6XN?. Available thicknesses for Alloy SSC-6MO:
※ DATA SHEET - UNS N08926 ※. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer
Incoloy 926 is a super-austenitic with 6%-7% molybdenum stainless steel which exhibits excellent corrosion resistance and resistance against pitting corrosion and crevice corrosion. Alloy 926 has a similar chemical composition compared with 904l stainless steel, but it has better general corrosion resistance and higher strength than 904L.
904L Stainless Steel. 904L is high nickel composition with low carbon content, copper alloy adding, which improve its resistance to corrosion, it is typical super Austenitic stainless steel, alternative grades sre DIN 1.4539 and UNS N08904, 904L have better properties than other austenitic stainless steels.
Austenitic Austenite Stainless Steel Austenitic | Martensitic | Ferritic | Duplex | Super Duplex | Superaustenitic | Superferritic | Precipitation Hardening. This type of stainless steel is dominant in the market. The group includes the very common AISI 304 and AISI 316 steel, but also the higher alloyed AISI 310S and ASTM N08904.
Stainless steel 1.4529, X1NiCrMoCuN25-20-7, Alloy 926, UNS N08926 resistant to intergranular corrosion according to EN 10088-1. 1.4529, X1NiCrMoCuN25-20-7 - specification and application. 1.4529 grade is high alloyed stainless steel with an austenitic structure, which can be classified as nickel alloys (according to American standards).
ZERON ? 100 (F55 Duplex / 25Cr Duplex) is a super duplex stainless steel for use in aggressive environments.. Its properties include: Resistant to pitting and crevice corrosion in warm seawater with a guaranteed corrosion performance (PREN > 40) Lower more stable price compared to nickel based alloys